Firmware Update

Atomos & Z CAM: 5.8K/4K ProRes RAW FW Update for E2 Cameras

Atomos and Z CAM have finally released their highly anticipated firmware update adding 5.8K and 4K ProRes RAW recording and camera control for Z CAM E2 series cinema cameras.

For more information, read the Atomos press release below.

Download the firmware update (ver. 10.5) from the Atomos support page here.

Download the Z CAM E2 Cameras firmware update (ver. 0.96) from the Z CAM support page here.

July 1, 2020

AtomOS firmware ver. 10.5 Update

Atomos and Z CAM have today enabled 12-bit 5.8K Apple ProRes RAW over HDMI recording on the Ninja V HDR monitor-recorder in combination with the Flagship series Z CAM E2-F6, E2-F8 and E2-S6 large sensor cinema cameras, as well as 4K ProRes RAW recording from the Micro 4/3 E2, E2-M4 and E2 C models.

Camera controls on Ninja V for Z CAM

Dan Ludeman with the Z-CAM E2-S6 and Ninja V

Atomos have also released new camera control functions for all Z CAM models that allow key functions to be set from the Ninja V via the monitor’s touchscreen. The Ninja V connects via USB-C and allows two-way communication for a range of controls such as record start/stop, iris, shutter speed, ISO and eND. The Control feature works whether recording internally in the camera, or externally to the Ninja V. The camera constantly updates the Ninja V with the value of each setting, which is in turn displayed clearly on the monitor. As a result you can now record ProRes RAW from the camera and still be able to control main camera functions at the same time on the Ninja V screen. To use the feature will require an appropriate interface cable – either the existing Atomos Serial to USB cable with a USB-A to USB-C type adapter, or a new dedicated Atomos control cable that will be available in Summer 2020 as an optional accessory.

Atomos Ninja V

The Ninja V can record 5.8K ProRes RAW at up to 29.97p and up to 4K (UHD) up to 59.94p from all three Flagship models: the E2-S6, E2-F6 and E2-F8. The E2 and new E2-M4 will output RAW at up to DCI 4Kp59.94 for recording in ProRes RAW. The E2C can output RAW at DCI 4K 29.97p to the Ninja V. The frame rates available for RAW over HDMI recording vary depending on the camera model and additional frame rates will be added in the future.

Atomos & RAW over HDMI

Support for RAW over HDMI is now available or announced for cameras from Panasonic, Fujifilm, Nikon, Sigma and Z CAM. This is in addition to several Sony, Canon and Panasonic cinema cameras that already support ProRes RAW recording via SDI to Atomos monitor-recorders. As a result, ProRes RAW is now firmly established for RAW video capture, with many more cameras due this year.

Behind the scenes of UN/SEEN by James Tomkin: Shot in ProRes RAW on Z CAM + Ninja V


Image Credits: Atomos News Release